Operating System Description
1. The operation buttons and switches are centralized on the panel operation box (as shown in Figure 1). During operation, you only need to press the corresponding function buttons according to certain procedures to carry out normal operation. Each button has corresponding instructions. Pressing the red emergency stop button can realize the total stop of the machine tool.
2. The machine tool uses 380V ± 10%, 50Hz ± 10% three-phase four wire AC, 36V control circuit position and 36V work light.
3. power on
Connect the three-phase power supply and PE line, turn on the power switch, turn on the emergency stop button, and the display screen is on.
4. precautions
A. When checking or repairing the circuit, the power supply must be cut off.
B. When starting up, keep a distance of 8-10mm between the tool and the workpiece to avoid the workpiece colliding with the tool when feeding.
C. During tool installation, first determine whether the tool holder is retracted in place.
D. Disassemble the tool holder regularly and add lubricating oil. The cleaning cycle of tool holder is generally about 10 days. If it is used frequently, it should be cleaned once every 3-5 days. The lubricating oil cycle is 4 times per shift.
E. The midway stop must be stopped when the rear fixture is loosened and returned.
2.4 manual operation
2.4. 1. Connect the power supply first, three-phase four wire, and there must be zero line, otherwise the electrical appliance will be burned.
2.4. 2 close the switch, close all the switches in the electrical cabinet, and open the emergency stop on the panel.
2.4. 3 switch the manual and automatic knob to manual, and then operate in the touch screen manual mode. (Figure 1, figure 2, figure 3)
2.4. 4 manual operation sequence
Manual on (turn the manual automatic knob to manual, and click the manual button on the touch screen) → oil pump on → front clamping → rear clamping → host on → feed → cut off the backward cutter → host stop → complete.
Package & Delivery:
the product is packed in waterproof file and standard carton, wood and steel structure, we make sure the product good in transportation. we will send machine on time and choose TNT, DHL, FEDEX and so on famous international logistic company. we also packed and deliver as customer's special requirement.
Factory Show:
FAQ: