|Place of Origin:||Hefei, China|
|Certification:||CE, ISO, SGS, BV, GB, ASTM|
|Minimum Order Quantity:||1950 Square Meters|
|Price:||USD 0.65-1.55 Square Meter|
|Packaging Details:||packed as roll in woven bag, width: from 1m to 5m, length: from 55m to 260m|
|Delivery Time:||7 Days|
|Payment Terms:||T/T, D/A, Western Union, D/P, MoneyGram, L/C, Paypal|
|Supply Ability:||28.5 Tons per Day|
|Product Name:||Short Filament Nonwoven Geotextile Fabric 400g For Soil Protection In River Bank||Weight:||400 G/㎡|
|Material:||Non Woven Fabric||Rolling Size:||Width: From 1m To 6m, Length: From 60m To 260m|
|Function:||Protect Water, Isolate, Reinforce, Drainage, Separate Soil||Application:||Subsoil Drain, Gabion Walls, Water Source Project, Coastal, Flood Dam|
|Origin:||Made In China|
Short Filament Nonwoven Geotextile Fabric,
Nonwoven Geotextile Fabric 400g,
Soil Protection Nonwoven Geotextile Fabric
Short Filament Nonwoven Geotextile Fabric 400g For Soil Protection In River Bank
material: polyester, polypropylene(PET, PP)
function: protect, isolate, reinforce, drainage, enhance, separate soil
application: tidal reclamation project, coastal, flood dam, subsoil
A geotextile is typically defined as any permeable textile material used to increase soil stability, provide erosion control or aid in drainage. More simply put, if it is made of fabric and buried in the ground it is probably a geotextile! Geotextiles have been in use for thousands of years dating back to the Egyptian Pharaohs. These early geotextile applications were basically natural fibers or vegetation mixed directly with soil. Modern geotextiles are usually made from a synthetic polymer such as polypropylene, polyester, polyethylene and polyamides. Geotextiles can be woven, knitted or non-woven. Varying polymers and manufacturing processes result in an array of geotextiles suitable for a variety of civil construction applications.
Polyester continuous filament needle punched nonwoven geotextile is made from polyester chip by high-temperature-pressure to be liquid, air drawing into wire, lapping, needle punched then winding into roll to become finished products, which also called a step molding method. Usually, this form of manufacturing has superior hydraulic performance and good applications, including separation, filtration, protection, reinforcement and drainage, etc. According to customer requirments, it can be covered and composed with geomembrane, geonet and other materials to become geomembrane-geotextile composites, geonet-geotextile composites and other products by heat treatment.
A balance of a geotextile to soil system that allows sufficient fluid flow in the plane of geotextile with limited soil loss.
Perforation and permeability are the most important properties of geotextiles with infiltration action.
The introduction of geotextiles into the soil will increase the tensile strength of the soil by the same amount of metal concrete.
A layer of nonwoven geotextile is saturated between existing and new asphalt layers.
|3||Width Deviation (%)||-0.5|
|4||Breaking Strength (KN/m≧)||2.5||4.5||6.5||8||9.5||11||12.5||14||16||19||25||Horizontal & Vertical|
|5||Elongation at Break (%)||25-100|
|6||CBR Bursting Strength (KN)||0.3||0.6||0.9||1.2||1.5||1.8||2.1||2.4||2.7||3.2||4|
|8||Equivalent Aperture O90 (O95) mm||0.07-0.2|
|9||Vertical Permeability (cm/s)||Kx(10-1-10-3)||K=1.0*9.9|
|10||Tear Strength (KN≧ )||0.08||0.12||0.16||0.2||0.24||0.28||0.33||0.38||0.42||0.46||0.6||Horizontal & Vertical|
all products will be packed well with woven bags and tight belts, or packed according to customer's requirement,
3Tons per 20ft container;
5Tons per 40ft container;
8Tons per 40HQ container.
all products will be delivered in time according to the requirement,
Why Choose US: